When we got the call from a homeowner in Springville, UT, about a strange odor and soft spots on the wall, we knew it was likely a bigger issue. Once on-site, we found a serious mold problem hiding inside their master bathroom. This wasn’t just surface damage but a full-blown mold-damaged bathroom that needed immediate attention.
At Prime Restoration LLC, we take mold seriously. We knew we had to act fast to keep the problem from spreading and make the space safe again. Learn how we tackled mold removal in Springville, UT!
Where the Mold Was Hiding
Mold doesn’t always show up in obvious places. In this case, the damage had crept in behind the baseboards, between the drywall and framing, and even under the tile near the subfloor. The bottom of the shower door had trapped moisture, creating the perfect conditions for mold to thrive. It was clear this mold-damaged bathroom needed a full cleanup and careful rebuilding.
Mold-Damaged Bathroom: Our Process
Every mold job is different, but the goal is always the same: remove the mold completely and make sure it doesn’t come back. In this mold-damaged bathroom, we had to go deeper than surface-level cleaning. The mold had spread into hard-to-reach areas, so we took a careful, step-by-step approach to fix the problem and rebuild the space.
Step 1: Mold Remediation
We began by setting up a proper containment zone to keep mold spores from spreading to other parts of the home. With the area sealed off and our air scrubber running, we got to work on the core of the issue: removing the mold from every layer of the structure. Here’s what that looked like:
- Containment setup: We sealed off the mold-damaged bathroom to stop cross-contamination.
- Air scrubber use: A commercial HEPA air scrubber filtered out airborne mold spores.
- Surface removal: We cut out drywall, removed baseboards, and took off the bottom of the shower door to expose affected areas.
- Abrasive sanding: We sanded the mold off the subfloor and framing to clean it to the bare material.
- HEPA vacuuming: Every surface in the space was vacuumed using HEPA vacuum filters to catch microscopic spores.
- Antimicrobial treatment: We treated all exposed wood and remaining surfaces to stop mold from returning.
- Dry-out check: Before moving forward, we confirmed the space was completely dry using professional moisture meters.
Step 2: Rebuilding the Bathroom
With all the mold gone and the space verified as clean, it was time to put everything back together. This part of the project was just as important as the removal. We replaced the drywall we had to cut out, reinstalled the baseboards, and reset the bottom section of the shower door. We cleaned this mold-damaged bathroom and gave it a fresh start.
A Happy Springville Homeowner
After we finished the job, the homeowner told us they finally felt at ease using their bathroom again. The musty smell was gone, the mold was completely removed, and the space looked just like it did before.
They appreciated how clear we were during every step of the process, especially when we explained what was going on behind the walls. Seeing that kind of relief on a customer’s face is always rewarding. That’s why we do what we do.
Say Goodbye to Mold – For Good
Don’t let a mold-damaged bathroom take over your home! If you’ve noticed musty smells, peeling paint, or soft spots in your bathroom, don’t ignore them. Our team at Prime Restoration LLC is here to inspect, clean, and rebuild fast and professionally. Call us today at (801) 509-6899 or contact us online to schedule your mold inspection in Springville, UT.
