Skip to main content

No one wants to go through the hassles of dealing with water damage, especially in the bathroom. This is a room where you often find yourself relaxing after a long day or getting ready for a night out. It’s essential to take some preventive measures and contact a professional water damage restoration company such as Prime Restoration  to avoid bathroom water damage, and in this article we will share some ideas on how to check for the signs of water damage in your bathroom to help you prevent it from happening.

Check for Leaks Regularly

You don’t have to wait until it’s too late to start taking precautions against water damage. One of the surest ways to prevent water-related disasters is to have regular checks to see if there are leaks. Make it a habit to inspect your bathroom fixtures and appliances like showers or tubs for any telltale signs of leakage, and fix them before they become messy.

If you notice that your sink, shower, or toilet is leaking, don’t wait – call a plumber right away! You can save yourself some money that would have been used to deal with expensive repairs down the road by fixing a leak early on. Plus, you’ll avoid the hassle and inconvenience of having no running water in your bathroom.

It’s also important to watch on your walls or floors around the bathroom. If you see any signs of moisture or swelling, it’s likely that you have a leak somewhere and should take action right away.

Install Water Detectors

In addition to checking for leaks regularly, you can install water detectors in strategic places around your bathroom. These handy devices will sound an alarm if they detect any excess moisture or any changes in humidity levels, so you can deal with the problem before it becomes a bigger problem.

These devices are available at most hardware stores, and they’re a wise investment for any home.

Make sure to install them in areas that have a water supply, such as sinks, toilets, and bathtubs, as these are the areas where the damage is most likely to happen.

Place a Bath Mat on the Floor to Absorb Excess Water

It’s essential to place a bath mat on the floor to absorb excess water. This will help block the water from seeping underneath the door and damaging your flooring. There are many different mats to choose from, so find one that best suits your needs.

Use a Sink Stopper

Another easy way to prevent water damage is by using a sink stopper. This will help keep excess water flowing down the drain and seeping underneath the bathroom door.

Be sure to clean the sink stopper regularly so that it does not become clogged with hair and other debris. If the sink stopper is not working correctly, you can also try using a drain plug or cover.

Turn on Your Exhaust Fan

When taking your shower or bath, always turn on the exhaust fan. This will help remove the moisture from the bathroom, and it will also help prevent mold growth. The fan should be turned on for at least 20 minutes after you are done showering or bathing.

If the exhaust fan is not in your bathroom, consider installing one. They are relatively inexpensive, and they can help keep your bathroom dry and mold-free.

Install a Moisture Barrier behind your Tile Walls

Another important thing that you can consider doing to prevent water damage is to install a moisture barrier behind your tile walls. This will help block the water from seeping through the wall and causing damage. This is a relatively easy and inexpensive project to do, and it can save you a lot of money in the long run.

Replace Cracked or Missing Tiles

Missing tiles can lead to water damage, so it’s crucial to repair or replace any cracked or missing tiles as soon as possible. You can buy replacement tiles at most hardware stores. However, if you aren’t comfortable with doing the job yourself, you can always call a professional to do it for you.

Upgrade your Fixtures

If you’re using the same old fixtures in your bathroom, it might be time for an upgrade. Low-flow toilets and showerheads can help reduce the amount of water used each day, which will help prevent any future leaks or floods.

There are several resources on the internet that can help walk you through the process. Just be sure to read the reviews before purchasing any new fixtures!

Test Valves

For the people of Spanish Fork, Utah, it is a common occurrence to have water damage and mold in the bathroom. The main reason for this is faulty plumbing, and more specifically, the valves not working correctly. When these valves do not close or open all the way, water can easily flow out and create a mess.

To test your valves, turn on the faucet and see if any water comes out of the other end. If it does, you know that your valve is not working correctly and will need to be fixed as soon as possible. This can be done by either calling a plumber or doing it yourself if you are comfortable fixing plumbing issues.

Final Word

Water damage can be a massive headache and can cause a lot of damage in a short amount of time. By following these simple tips shared above, you can help prevent water damage in your bathroom and keep it looking in its best state for years to come! If the problem does occur, be sure to contact Prime Restoration at (801) 509-6899 immediately to help you for any water damage repair and get the damage under control.

Leave a Reply