Water damage can go from a minor nuisance to a major disaster in no time if left unchecked. At Prime Restoration LLC, we’re experts in tackling water damage fast to stop bigger problems like mold growth and structural decay. Recently, we helped a homeowner in West Jordan save their home from a leaky bathroom pipe. The water gradually spread through the floor, making its way into the basement. In this case study, we’ll walk you through all the steps of water damage mitigation in West Jordan, UT, we had to take to restore the safety of this home.
The Moment the Homeowner Reached Out to Us
We received a call from a homeowner in West Jordan who noticed water pooling under their bathroom sink. At first, they thought it was a small leak, but soon they saw water staining the ceiling of their basement. Concerned about potential damage, they reached out to us for help.
What We Needed to Do to Save This Home From a Leaky Bathroom Pipe
We needed a quick and efficient solution in order to save this home from additional damage and potential mold growth. Here’s how we approached this project.
Stopping the Leak In the Bathroom
Before starting any mitigation, we shut off the water supply to the affected area. The pipe in the bathroom had been leaking for some time, but the homeowner managed to tighten it before we arrived, reducing the amount of water that was pooling under the sink.
Checking the Basement and Bathroom Damage
Next, we used a moisture meter and thermal imaging cameras to determine the extent of the water damage. The water had soaked into the flooring of the bathroom and traveled down into the basement, affecting the drywall, ceiling, insulation, and door framing.
Removing Damaged Materials
Since some materials were beyond saving, we removed portions of the drywall from the basement walls and ceiling. We also took out the wet insulation to prevent mold growth and to make sure the ceiling would dry fully without insulation in the way.
Setting Up Drying Equipment
Drying may be one of the most thorough steps of the mitigation process. Here’s how we did it:
- Setting Up the Drying Equipment: We carefully placed dehumidifiers and air movers throughout the affected areas to promote airflow and speed up the drying process.
- Rapid Moisture Removal: The air movers made sure the moisture would evaporate more quickly, allowing us to dry the space much faster than relying on natural airflow alone.
- Humidity Control: Dehumidifiers worked alongside the air movers to extract excess moisture from the air, reducing the risk of mold growth and further structural damage.
Monitoring the Drying Process
Over the next few days, we returned to the home to check moisture levels with our meters. This ensured the structure was drying properly before any repairs could begin. Once the readings showed that all affected materials were dry, we removed the equipment.
Step 6: Last Inspection and Cleanup
After seeing that the space was fully dry, we cleaned up any remaining debris and left the home ready for repairs. The homeowner was relieved that we had stopped the water damage before it caused further problems to their home.
Need Water Damage Mitigation? Contact Prime Restoration LLC Today!
If you’re dealing with water damage in West Jordan or the surrounding areas, don’t wait for it to get worse. Prime Restoration LLC is here to provide expert help. Our team will act fast to prevent further damage and get your home back to normal. Call us today for professional water damage mitigation services at (801) 509-6899, or fill out an online form on our website!
