At Prime Restoration LLC, we understand that water damage can quickly turn into a serious issue if not tackled quickly. When a residential homeowner in Herriman, UT, called us after a severe rainstorm, we knew we had to act fast and tackle water damage restoration for them. Their family room had suffered water damage due to a foundation crack, and poor grading around the home was making the situation worse. Our team immediately jumped into action to minimize the damage and restore the affected area.
A Foundation Crack Led to Water Damage
The homeowner’s family room had been significantly affected by water entering through a crack in the foundation. The rainstorm had overwhelmed the existing drainage, causing water to pool near the house and seep into the interior. As a result, several materials in the family room, including drywall, insulation, casing, carpet and pad, and baseboards, were damaged. The homeowner was concerned about potential mold growth and further structural damage, so they contacted us to handle the water mitigation as quickly and efficiently as possible.
Our Approach
We approached this project with a clear plan to mitigate the water damage and prevent future issues. Below are the steps we took to restore the affected area.
Initial Assessment
Our first step was to do a thorough assessment of the water damage. We used a thermal imaging camera and moisture meter to identify all the affected areas, including those that were not immediately visible. This assessment was necessary to ensure that no moisture was left behind, which could lead to mold growth.
Water Extraction and Drying
To stop further damage, we quickly began the water extraction process. We used industrial-grade water extractors to remove as much water as possible from the carpet and pad. After the initial extraction, we used powerful dehumidifiers to reduce humidity levels in the room. At the same time, we strategically placed air movers to circulate air across the wet surfaces, speeding up the drying process. This combination of equipment was important to prevent mold from developing and to ensure that the family room was properly dried and ready for repairs.
Material Removal
Once the excess moisture was removed, we focused on taking out the damaged materials. This step involved:
- Removing Damaged Drywall and Insulation: We carefully removed the affected drywall and insulation, ensuring that all compromised material was disposed of properly.
- Taking Out the Affected Casing and Baseboards: We then removed the damaged casing and baseboards, which were beyond repair due to the water exposure.
Handling the Source of the Problem
After the damaged materials were removed, we turned our attention to the source of the water intrusion. We removed the framing around the affected area to expose the crack in the foundation. This allowed us to coordinate with a foundation repair specialist to seal the crack and ensure it would not cause future problems. In addition, we advised the homeowner to consider regrading the area around the home to improve drainage and prevent water from pooling near the foundation.
The Customer’s Satisfaction
Our quick and thorough approach left the homeowner in Herriman, UT, highly satisfied. They were relieved to see their family room restored to its original condition, free from water damage and mold risks. Their positive feedback reassured us that we had met their expectations and delivered quality results.
Ready to Restore Your Space? Trust Prime Restoration LLC!
If you’re dealing with water damage, let Prime Restoration LLC handle the job with expertise and care. Contact us today to get started on restoring your home to its best condition. Call us at (801) 509-6899 or fill out an online form on our website.
