At Prime Restoration LLC, we understand how stressful water damage can be, especially during an after-hours rescue when time is critical. Recently, we were called to a residential home, for an emergency water mitigation in Lehi, Utah. Water from a leak had spread through multiple areas, including the basement bedroom, kitchen, pantry, living room, and crawlspace. To prevent further damage and mold growth, we had to act quickly.
Step-by-Step Water Mitigation Process
Our water mitigation process is designed to tackle every detail with precision and efficiency, ensuring that your home is fully protected from further damage and mold growth. With advanced tools and techniques, we tackle each step carefully, from initial assessment to final inspection. Here’s how Prime Restoration LLC systematically restored safety after unexpected water damage:
Inspection and Assessment
We began by thoroughly inspecting the affected areas. Using our thermal imaging camera and moisture meter, we identified the full extent of the water damage. We found that water had impacted flooring, drywall, and even parts of the ceiling in the bedroom, as well as a kitchen cabinet. Our inspection confirmed that quick action was essential to avoid structural damage and mold growth.
Setting Up Containment
To prevent moisture from spreading, we set up containment barriers around the affected areas. This step was crucial to protect other parts of the home while we worked, especially in such a large affected space.
Water Extraction and Drying Setup
We used floor drying mats to begin pulling moisture out of the affected flooring, focusing especially on the kitchen and bedroom. To speed up the drying process, we placed air movers and dehumidifiers in key locations throughout the home. The air movers helped circulate air to reduce moisture levels quickly, while the dehumidifiers removed water vapor from the air, minimizing the risk of mold growth.
Targeted Drying and Moisture Control
To ensure thorough drying and prevent mold growth, we used a targeted approach in the most affected areas:
- Bedroom: We installed additional drying equipment to focus on drying the drywall and ceiling. Additionally, we removed the wet tac strip and door casing, which are prone to retaining moisture, to further reduce mold risks.
- Kitchen: We carefully dried the impacted kitchen cabinet, knowing that untreated water damage could easily compromise cabinetry materials over time.
Air Quality Control
Throughout the process, we ran an air scrubber to filter the air and capture airborne particles, including any potential mold spores. This step was important for ensuring a safe environment for the homeowners, as mold can spread quickly in moist conditions.
Application of Antimicrobial Treatments
As an extra precaution, we applied an antimicrobial solution to all affected areas. This treatment was especially important in the basement and crawlspace, where mold can grow unnoticed.
Monitoring and Final Inspection
We monitored the drying progress daily, using our moisture meter to confirm that each affected area was drying completely. After three days, we performed a final inspection to ensure that the home was fully dry and safe for the family.
Another Successful After-Hours Rescue
Our quick response and careful mitigation process prevented further water damage and mold growth. The homeowner was relieved to find their home restored to its pre-loss condition. At Prime Restoration LLC, we take pride in providing fast, professional water mitigation services, even after hours. In cases like this, fast action can make all the difference, and we’re glad to have helped this Lehi homeowner get back to normal as quickly as possible.
Need Immediate Help? Call Prime Restoration LLC Today!
When water damage strikes unexpectedly, you don’t have time to wait. Prime Restoration LLC is ready 24/7 to provide fast, reliable water mitigation services that protect your home and prevent further damage. Call us at (801) 509-6899 or fill out an online form on our website.
